LED lighting
Luminaires for every setting, outdoor, indoor, hazardous, portable and red light therapy, with the photometric design to place them. Specified, supplied and supported.
- 2 Million+
- light fixtures installed globally
- Up to 80 %
- energy savings
- Low to zero
- ongoing maintenance
- Intelligence
- selected families plug into the INTELIGHT platform for everything smart and IoT
Less energy, less carbon. Lighting is one of the world’s largest uses of electricity, so cutting its energy use by up to 80 % cuts the carbon emissions that come with it.
Five ranges, one engineering team.
Also from CONXCORP:Solar & power →
It is far cheaper to save a watt than to produce one.
Every fixture comes with the design to place it.
Then supplied and installed
Light levels, uniformity and energy use, known before a single fixture goes up.
- Average light level (maintained)
- 12.0 lx
- BUG rating
- B1-U0-G1
- Lighting power density
- 0.9 W/m²
NoteExample car park and figures: light level in lux at every calculation point and isolux lines from the same calculation, with light loss factors so the values hold as the fixtures age.
- Light levels
- Uniformity
- Glare
- Colour temperature and rendering
- Total light loss factor
- Lumen maintenance
- Dirt and cleaning cycles
- Mounting heights and spacing
- Surface reflectances
- Ambient temperature and environment
- Voltage, voltage drop and circuiting
- Light trespass and BUG rating
- Uplight and sky glow
- Energy use and power density
- Standards and recommended practices
Everything a specifier needs, on every product page.
- Spec sheetsThe current sheet for each family, as a PDF.
- IES filesPhotometric files for your own layouts, available on request.
- Installation manualsWhere published, next to the spec sheet.
- Part-number builderPick each option and copy the full part number.
- Lumen packagesEvery wattage step with its output.
- ListingsOnly the marks printed on each spec sheet.
When the catalog does not fit, we engineer it.
Fully custom fixtures
When required, a complete fixture engineered for the project: output, colour temperature, housing, finish and mounting.
Custom optics
Specified at order when a standard distribution will not do.
Pluggable intelligence
Selected families are INTELIGHT-ready: plug in the platform for everything smart and IoT, right where the light already is.



